This is a 6" Class 150 globe valve made to ASME B16.34. The body and bonnet are ASTM A216 WCB cast steel, with RF flanged ends. It has a bolted bonnet and OS&Y rising stem. It works for water, oil, gas, and steam in general industrial services. It gives reliable shut-off under moderate pressure and temperature.
-
This 2″ (DN50) Class 600 handwheel operated globe valve is manufactured per BS 1873 standard. The body is cast steel ASTM A216 WCB, with stainless steel trim. End connections are RF flanged. The valve features a bolted bonnet, OS&Y rising stem, and self-aligning disc. It is designed for precise flow control and tight shut-off in high-pressure industrial systems, suitable for oil, gas, steam, and water services.
-
This 2″ (DN50) Class 150 Y-strainer meets ASME B16.34. The body is ASTM A351 CF8M cast stainless steel, with a 316 stainless steel screen (Mesh 40). End connections are RF flanged per ASME B16.5. The Y-type design has a built-in drain for easy cleaning. It filters out solids to protect pumps, meters, and valves. Suitable for water, gas, oil, and other general industrial fluids. -
This DN150 (6") Class 150 swing check valve is designed to API 603 and BS 1868. The body is cast from CK3MCuN super duplex stainless steel, and the disc and trim are CK3MCuN with Stellite 6 hardfacing. End connections are RF flanged to ASME B16.5. The valve operates automatically to prevent flow reversal. The swing disc provides reliable sealing, and the super duplex material offers excellent resistance to corrosion, pitting, and stress corrosion cracking, particularly in seawater and chloride-containing environments. It is suitable for industrial pipeline systems that require backflow prevention under moderate pressure and highly corrosive conditions. -
This 24″ (DN600) Class 600 BS1873 gear-operated globe valve uses an OS&Y (Outside Screw and Yoke) rising stem and a plug disc. It has a bolted bonnet and either threaded or welded seat rings. The body is cast steel A216 WCB. The gear operator eases handling given the large size. The valve serves in oil, gas, petrochemical, and power generation systems for isolation and throttling, where tight shut-off and flow regulation are needed.
-
This DN15 (1/2″) PN16 stainless steel Y-Strainer is suitable for chemical, pharmaceutical, petrochemical, hydraulic, and compressed air systems. It has a removable stainless steel filter, a bolted bonnet with a threaded BSP drain plug, and TFM 4215 gaskets. It is approved for explosive atmospheres (ATEX Zone 1&21 and Zone 2&22) and can work at low temperatures down to -40°C. -
This 2″ (DN50) Class 150 Al-Bronze flanged floating ball valve has a full port and a cast bronze body (ASTM B148 C95800). It comes with a lever handle for manual operation. The valve suits many applications, including desalination, chemical processing, water treatment, marine, and pulp & paper. The Al-Bronze body resists corrosion well, and the PTFE/RPTFE seats give reliable sealing. It is designed to API 608, ASME B16.34, and BS 5351. -
This DN25 (1″) PN40 forged steel floating ball valve features a full port design and 2-piece body construction. The body material is ASTM A105 forged steel. It is equipped with a lever handle for manual operation. The valve is suitable for a wide range of applications including oil, water, gas, and general industrial services. The A105 body provides good strength and durability, while the soft seat materials ensure reliable sealing. The valve is designed to ISO 17292 and ASME B16.34 standards. -
This 2″ (DN50) Class 300 WCB flanged floating ball valve features a full port design and floating ball construction. The body material is ASTM A216 WCB cast carbon steel. It is equipped with a lever handle for manual operation. The valve is suitable for a wide range of applications including water, oil, and gas services. The WCB body provides good strength and durability, while the soft seat materials ensure reliable sealing. The valve is designed to API 6D, ASME B16.34, and API 608 standards. -
This DN100 (4″) PN40 forged trunnion mounted ball valve features a full port design and trunnion ball construction. The body material is ASTM A182 F316 forged stainless steel. It has a gear operator for smooth operation. Suitable for a wide range of applications including water, oil, and gas services. The F316 body resists corrosion well, and the trunnion design lowers operating torque. The valve is designed to ISO 17292 standards. -
This DN250 (10″) Class 600 trunnion mounted ball valve features a full port design and fixed ball construction. The body material is ASTM A216 WCB cast carbon steel. It is equipped with a gear operator for smooth and reliable operation. It suits water, oil, and gas services. The WCB body gives good strength, and the trunnion design lowers torque. The valve is designed to API 6D.
