-
This DN80 (3″) PN16 flanged Y-Strainer has a CF8M body and cover, with a 316 stainless steel 40 Mesh screen. It removes solid particles from fluid streams to protect downstream equipment like pumps, meters, and control valves. This strainer suits many industrial applications that need reliable filtration. Its temperature range is -29°C to 180°C. -
This DN80 (3″) PN16 trunnion ball valve has a full port and a fixed ball. The body is ASTM A105 forged carbon steel. It comes with a gear operator for smooth operation. It suits water, oil, and gas services. The A105 body gives good strength, and the trunnion design lowers torque. The valve is designed to API 6D. -
This DN80 (3") Class 1500 swing check valve has a pressure seal cover (PSC). It meets API 6D and BS 1868. The body is cast steel A216 WCB. The trim is 13% Cr+HF stainless steel. End connections are butt-welding per ASME B16.25. The PSC design gives reliable sealing at high pressure. Sealing gets tighter as pressure goes up. The valve works automatically to stop flow reversal. The swing disc gives reliable sealing. The stainless trim resists wear and corrosion well. It is used in high-pressure industrial pipelines that need strong backflow prevention. -
Premium quality DN600 Class 600 gate valve. It handles oil, gas, water and steam lines in refineries, power plants and industrial systems. The WCB cast steel body comes with a bolted bonnet and a flexible wedge that maintains sealing even when temperature changes. Trim is 13 percent chrome with hardfacing on the seat and disc. Connection is RF flanged to ASME B16.5. Operation is gear operated, smooth and reliable at this large size. It is designed to API 600, fully compliant with ASME B16.34, and tested to API 598.
- Body: ASTM A216 WCB cast steel, bolted bonnet
- Wedge: Flexible wedge, 13Cr and hardfaced
- Connection: RF flanged, ASME B16.5
- Operation: Gear operated
- Temperature range: -29°C to 425°C for WCB material
- Media: Oil, gas, steam, water, non corrosive industrial fluids
-
This 24″ (DN600) Class 600 BS1873 gear-operated globe valve uses an OS&Y (Outside Screw and Yoke) rising stem and a plug disc. It has a bolted bonnet and either threaded or welded seat rings. The body is cast steel A216 WCB. The gear operator eases handling given the large size. The valve serves in oil, gas, petrochemical, and power generation systems for isolation and throttling, where tight shut-off and flow regulation are needed.
-
This 3-piece SS304/316 ball valve is connected by threads and is suitable for shut-off operations within the low to medium pressure range. In actual tests, this valve can achieve zero visible leakage under clean media and minimal pressure drop when fully opened. The handle is covered with blue vinyl and can be rotated 90° to complete the switch operation. On/off direction sign and company logo can be customized on the handle. This valve can be used for Gas, Oil, Steam, Water, Z15W-(16-64)P Nitric acid and Z15W-(16-64)R Acetic acid.- Nominal pressure: PN1.6, 2.5, 4.0, 6.4MPa
- Strength testing pressure: PT2.4, 3.8, 6.0, 9.6MPa
- Seat testing pressure(high pressure): 1.8, 2.8, 4.4, 7.1MPa
- Applicable media: Z15H-(16-64)C Water, Oil, Gas, Z15W-(16-64)P Nitric acid, Z15W-(16-64)R Acetic acid
- Applicable temperature: -29~180°C
-
This floating ball valve uses ST 37.8 for the body. It has a 2-inch nominal diameter (DN50) and a pressure rating of PN40 (Class 300 LB). The ball is made of SS 304. The valve body is fully welded, and the bore is reduced. Butt-welded ends are provided for a secure connection. Operation is by lever, which gives users a reliable performance across a range of industrial applications.- Ball material: SS 304
- Body material: ST 37.8 (DIN EN 10217-2)
- Nominal class: PN40
- Nominal diameter: DN50 (2 Inch)
- Face to face: MFR
- Seat: RPTFE+C
- Test and inspection: GB/T
- Mode of operation: Lever
- End connection: BW
-
Premium quality DN50 Class 900 pressure seal bonnet globe valve for high-pressure steam, boiler feedwater, oil, gas, and hydrocarbon lines in power plants, refineries, and industrial systems. The WCB cast steel body has a pressure seal bonnet that seals tighter as pressure rises. The plug disc uses Stellite 6 hardfacing on the seat for precise throttling and wear resistance. Flow direction is low‑to‑high, marked on the body. Connection is butt weld or RF flanged to ASME B16.5. Handwheel for DN65 and below, gear operator for DN80 and above. Designed to API 623, compliant with ASME B16.34, tested to API 598.
- Body: ASTM A216 WCB cast steel, pressure seal bonnet
- Disc: Plug disc, Stellite 6 hardfaced seat, 13Cr disc
- Flow Direction: Low‑to‑High, marked on body
- Connection: BW / RF flanged, ASME B16.5
- Operation: Handwheel for DN65 and below, gear operator for DN80 and above
- Temperature range: -29°C to 425°C for WCB material
- Media: Steam, water, oil, gas, non‑corrosive fluids
-
This DN50 (2″) Class 800 Y-Strainer features a CF8M stainless steel body and bonnet, with a SS316 wire mesh screen. It is designed for easy cleaning and maintenance, with the screen manually cleaned by shutting down the line and removing the strainer cap. The strainer is suitable for air, natural gas, and a wide variety of liquid straining applications, protecting downstream equipment from unwanted sand, gravel, or other debris. It is commonly used in chemical processing, petroleum, power generation, marine, water treatment, and industrial facilities. -
This 2″ (DN50) Class 300 WCB flanged floating ball valve features a full port design and floating ball construction. The body material is ASTM A216 WCB cast carbon steel. It is equipped with a lever handle for manual operation. The valve is suitable for a wide range of applications including water, oil, and gas services. The WCB body provides good strength and durability, while the soft seat materials ensure reliable sealing. The valve is designed to API 6D, ASME B16.34, and API 608 standards. -
This 2″ (DN50) Class 300 forged steel floating ball valve features a full port design and 2-piece body construction. The body material is F316/316L stainless steel. It is equipped with a lever handle for manual operation. The valve is suitable for a wide range of applications including oil, water, gas, and general industrial services. The F316/316L body provides excellent corrosion resistance, while the soft seat materials ensure reliable sealing. The valve is designed to ASME B16.34 standards. -
This 2″ (DN50) Class 150 Y-strainer meets ASME B16.34. The body is ASTM A351 CF8M cast stainless steel, with a 316 stainless steel screen (Mesh 40). End connections are RF flanged per ASME B16.5. The Y-type design has a built-in drain for easy cleaning. It filters out solids to protect pumps, meters, and valves. Suitable for water, gas, oil, and other general industrial fluids. -
This 2" (DN50) Class 150 swing check valve follows BS 1868 and API 594. The body is ASTM A216 WCB cast steel. The trim is SS 316+STL Trim 12. End connections are RF flanged to ASME B16.5. It has a bolted bonnet, swing disc, and renewable seat. It works automatically to stop reverse flow. The swing disc seals well. The stainless steel trim with Stellite hardfacing resists wear and corrosion. It suits industrial pipelines that need backflow prevention under moderate pressure and temperature. -
This 2″ (DN50) Class 150 Al-Bronze flanged floating ball valve has a full port and a cast bronze body (ASTM B148 C95800). It comes with a lever handle for manual operation. The valve suits many applications, including desalination, chemical processing, water treatment, marine, and pulp & paper. The Al-Bronze body resists corrosion well, and the PTFE/RPTFE seats give reliable sealing. It is designed to API 608, ASME B16.34, and BS 5351. -
This 2″ (DN50) Class 600 handwheel operated globe valve is manufactured per BS 1873 standard. The body is cast steel ASTM A216 WCB, with stainless steel trim. End connections are RF flanged. The valve features a bolted bonnet, OS&Y rising stem, and self-aligning disc. It is designed for precise flow control and tight shut-off in high-pressure industrial systems, suitable for oil, gas, steam, and water services.
-
This 2" ANSI Class 300# RF flanged ball valve is made of ASTM B148 C95800 Ni-Al bronze and features a bolted bonnet, floating ball, and full bore design. With a blowout-proof stem, you don't have to worry about the stem popping out under pressure. The lever handle only needs a 90° turn to go from open to closed. Fire-safe and anti-static are included — it meets API 607, which is a good fit for seawater, oil, gas, and most corrosive fluids.- Connection: RF flanged as per ASME B16.5
- Body material: ASTM B148 C95800 Ni-Al bronze
- Operation: lever
- Design standard: API 608, BS 5351
- Test & inspection: API 598
-
This is a DN450 Class 300 triple offset butterfly valve. The body and disc are made of ASTM A351 CF8M stainless steel. The seat uses SS+Graphite multilayer metal sealing with no rubber. Tested per API 598 hydrostatic, the valve shows zero visible leakage. The lug type connection fits ASME B16.5 flanges. Operation is by worm gear with handwheel. Suitable media include oil, gas, chemical, steam and seawater. There are no rubber components inside. Temperature range goes from -29°C up to 400°C. The design meets API 609 Category B, with CF8M body and disc, lug type connection, SS+Graphite metal seat, and API 598 test standard.- Body/disc: ASTM A351 CF8M
- Lug type, fits B16.5
- Flanges seat: SS+Graphite (metal)
- Standards: API 609 & 598
- Temp: -29°C to 400°C
-
This 16 inch Class 300 fully welded carbon steel trunnion ball valve uses butt weld ends to ASME B16.25. It has a one‑piece welded body, which means no gasketed joints, no hidden leaks. The gear operator of the ballvalve handles full pressure without heavy effort. Three O‑rings seal the blowout‑proof stem. The soft seats made of RPTFE+C give our customers double block and bleed.- Operation: Gear operated
- Nominal diameter: DN400 16 inch
- Pressure rating: PN25
-
This is a 16" (DN400) Class 150 triple offset butterfly valve. The body is ASTM A216 WCB carbon steel. The disc is CF8 stainless steel. The seat is a laminated metal ring of SS304 and graphite. The triple offset design lifts the disc off the seat at the start of travel, eliminating rubbing and wear while delivering bubble-tight shut-off after thousands of cycles. The wafer type connection fits between ASME B16.5 flanges. Operation is a worm gear with handwheel, smooth and self-locking. The valve meets API 609 Category B and is tested to API 598.
- Body: ASTM A216 WCB carbon steel
- Disc: CF8 stainless steel
- Seat: Laminated metal SS304 + graphite
- Connection: Wafer, fits Class 150 flanges
- Operation: Worm gear with handwheel
- Standards: API 609 Cat. B, API 598
- Media: Oil, gas, steam, water, mild chemicals
-
Our triple offset butterfly valve follows API 609, Class 150, with a WCB body and CF8M disc. We tested it in our factory on clean media, and found zero visible leakage. Because the truss-framed disc clears the flow path at full open, pressure drop stays very low. The valve comes with a worm gear and handwheel. Simple and reliable. It works on water, oil, gas, steam, seawater, dilute acids, and alkalis.- Nominal diameter: DN400
- Pressure rating: Class 150
- Flange dimensions: ASME B16.5 / B16.47
- Test standard: API 598
- Temp range: -29°C to +400°C
-
This 1-1/2″ (DN40) Class 200 globe valve is manufactured per API 602 standard. The body is stainless steel ASTM A351 CF8M, with matching stainless steel trim. End connections are NPT threaded. The valve has a bolted bonnet, outside screw and yoke (OS&Y) rising stem design, and is suitable for oil, gas, and water services. It offers reliable shut-off and corrosion resistance in general industrial applications. -
This DN300 Class 600 slab gate valve is for crude oil and natural gas pipelines. The body is ASTM A216 WCB cast steel, full bore with through‑conduit. A Pipeline Inspection Gauge (PIG) can pass through for cleaning while the valve stays on the line. Inside, a flat slab gate moves between two floating seats. That gives double block and bleed, bidirectional sealing, and cavity relief. Seats and gate are stainless steel with Stellite 6 hardfacing – a metal‑to‑metal seal that handles abrasion and frequent cycles. Gear operated. RF flanged to ASME B16.5. Design to API 6D, fire‑safe to API 6FA, pressure‑temperature ratings to ASME B16.34. Tested to API 6D or API 598. Top entry design allows servicing internal parts without removing the valve from the pipeline.
- Body: ASTM A216 WCB cast steel, full bore through‑conduit
- Gate & seats: Stainless steel + Stellite 6 hardfacing
- Operation: Gear operated
- Connection: RF flanged, ASME B16.5
- Features: Double block and bleed, bidirectional sealing, cavity relief, piggable, top entry
- Standards: API 6D, API 6FA, ASME B16.34
-
This DN250 (10″) Class 600 trunnion mounted ball valve features a full port design and fixed ball construction. The body material is ASTM A216 WCB cast carbon steel. It is equipped with a gear operator for smooth and reliable operation. It suits water, oil, and gas services. The WCB body gives good strength, and the trunnion design lowers torque. The valve is designed to API 6D. -
This DN250 (10") Class 300 swing check valve is designed to API 6D. The body is cast steel A216 WCB, and the trim is 13% Cr+HF stainless steel. End connections are RF flanged to ASME B16.5. The valve operates automatically to prevent flow reversal. The swing disc provides reliable sealing, and the stainless trim offers good corrosion resistance. It is suitable for industrial pipeline systems that require backflow prevention under medium to high pressure conditions. -
This DN25 (1″) PN40 forged steel floating ball valve features a full port design and 2-piece body construction. The body material is ASTM A105 forged steel. It is equipped with a lever handle for manual operation. The valve is suitable for a wide range of applications including oil, water, gas, and general industrial services. The A105 body provides good strength and durability, while the soft seat materials ensure reliable sealing. The valve is designed to ISO 17292 and ASME B16.34 standards. -
This DN200 Class 300 gate valve suits oil, gas, water and steam service in refineries, power plants, and other industrial facilities. ASTM A216 WCB cast steel body with a bolted bonnet. A flexible wedge ensures both seats stay sealed when temperatures fluctuate. Trim is 13 percent chrome stainless steel – no hardfacing on this version. RF flanged to ASME B16.5. Handwheel operated. Design meets API 600, complies with ASME B16.34, and testing follows API 598.
- Body: ASTM A216 WCB cast steel, bolted bonnet
- Wedge: Flexible wedge, 13Cr stainless steel
- Connection: RF flanged, ASME B16.5
- Operation: Handwheel operated, rising stem OS&Y
- Temperature range: -29°C to +425°C for WCB material
- Media: Oil, gas, steam, water, non‑corrosive industrial fluids
-
Premium quality DN200 Class 1500 pressure seal gate valve. It handles high pressure steam, oil and gas lines where leaks are not an option. The WCB cast steel body uses a pressure seal bonnet that tightens as pressure goes up, plus a flexible wedge that keeps both seats sealed even when temperature changes. Trim is 13 percent chrome with Stellite 6 hardfacing on the seat and disc. Connection is RF flanged to ASME B16.5. Operation is gear operated, smooth and easy at this size. It is designed to API 600, fully compliant with ASME B16.34, and tested to API 598.
- Body: ASTM A216 WCB cast steel, pressure seal bonnet
- Wedge: Flexible wedge, 13Cr and Stellite 6 hardfaced
- Connection: RF flanged, ASME B16.5
- Operation: Gear operated
- Temperature range: -29°C to 425°C for WCB material
- Media: Steam, oil, natural gas, water, non corrosive liquids and gases up to high pressure
-
This DN200 (8″) Class 900 trunnion mounted ball valve features a full port design and three-piece side entry construction. It is equipped with a worm gear operator for smooth operation. It has Double Block and Bleed (DBB) capability and is built for high-pressure oil and gas pipelines. The A105 body gives strong durability, and the trunnion design lowers torque. The valve is designed to API 6D. -
This 3/4" Class 600# threaded ball valve is made of AISI 304 stainless steel and features a screwed cover, two-piece body, floating ball, and reduced bore design. The blowout-proof stem can prevent spraying from occurring under pressure. The handle operation only needs a 90° turn to go from open to closed. It has fire-safe and anti-static designs, which complies with API 607 and API 6FA. It can be used for industrial, commercial, residential and high-pressure fluid control.- Nominal diameter: 3/4"
- Pressure rating: Class 600
- Connection: Female national pipe threaded
- Body material: AISI 304 stainless steel
- Operation: handle
- Design standard: BS 5351
- Test & inspection: API 598, API 6D
-
This DN150 (6″) PN16 Y-Strainer features a ductile iron body and bonnet, with a stainless steel 1.4301 (304) screen, A2 plug and fasteners. It is designed to filter out grit, pebbles, and other impurities from water systems, protecting downstream equipment. The strainer is suitable for drinking water, HVAC, and other neutral liquids up to 130°C. The design focuses on easy maintenance and low head loss. -
This is a 6" Class 150 globe valve made to ASME B16.34. The body and bonnet are ASTM A216 WCB cast steel, with RF flanged ends. It has a bolted bonnet and OS&Y rising stem. It works for water, oil, gas, and steam in general industrial services. It gives reliable shut-off under moderate pressure and temperature.
-
This 6" Class 900 flanged swing check valve is manufactured per BS 1868 standard, cast steel WCB body, bolted bonnet, full port swing disc, external hinge pin structure with lifting eye bolt. It automatically opens under forward medium pressure and closes by disc self-weight & reverse fluid pressure to prevent pipeline backflow. No external actuator required, low flow resistance, easy internal maintenance. It applies to high-temperature & high-pressure industrial fluid pipelines. -
This DN150 (6") Class 150 swing check valve is designed to API 603 and BS 1868. The body is cast from CK3MCuN super duplex stainless steel, and the disc and trim are CK3MCuN with Stellite 6 hardfacing. End connections are RF flanged to ASME B16.5. The valve operates automatically to prevent flow reversal. The swing disc provides reliable sealing, and the super duplex material offers excellent resistance to corrosion, pitting, and stress corrosion cracking, particularly in seawater and chloride-containing environments. It is suitable for industrial pipeline systems that require backflow prevention under moderate pressure and highly corrosive conditions. -
This DN15 (1/2″) PN16 stainless steel Y-Strainer is suitable for chemical, pharmaceutical, petrochemical, hydraulic, and compressed air systems. It has a removable stainless steel filter, a bolted bonnet with a threaded BSP drain plug, and TFM 4215 gaskets. It is approved for explosive atmospheres (ATEX Zone 1&21 and Zone 2&22) and can work at low temperatures down to -40°C. -
This is a DN100 PN10 concentric butterfly valve – a solid, no-nonsense choice for water, air, and light oil lines. The ductile iron body comes with an NBR rubber liner, and the disc is stainless steel. Its wafer type connection fits right between ASME B16.5 or EN 1092-1 flanges. Operation of our butterfly valve is the simple lever handle, we only need a quarter turn to open or close. And it also built to API 609 Category A and tested to API 598.- Body: Ductile iron, NBR lined
- Disc: Stainless steel
- Connection: Wafer, fits Class 150 / PN10 flanges
- Media: Water, air, light oil, mild chemicals
-
The DN100 Class 150 gate valve is made from ASTM B148 C95800 nickel aluminum bronze. It's built for seawater, brine, and marine systems – where corrosion kills ordinary valves. The cast bronze body has a bolted bonnet and a flexible wedge. That wedge keeps both seats sealing even when temperatures move up and down. On the seat and disc we put 13 percent chrome plus a Stellite 6 hardfacing. The stem is Monel K500, known for high strength and excellent resistance to saltwater attack. Connection is RF flanged to ASME B16.5. A handwheel operates the valve – simple and straightforward. Design follows MSS SP‑80, with full compliance to ASME B16.34, and each valve gets tested to API 598.
- Body: ASTM B148 C95800 nickel aluminum bronze, bolted bonnet
- Wedge: Flexible wedge, 13Cr and Stellite 6 hardfaced
- Stem: Monel K500 (ASTM B865)
- Connection: RF flanged, ASME B16.5
- Operation: Handwheel operated
- Temperature range: -29°C to +200°C for C95800 material (up to +425°C available upon request)
- Media: Seawater, brine, marine environment, dilute acids, non‑oxidizing chemicals
Products
Services
Company
© Copyright 2003 - 2026 | BallValve Technoloty Co., Ltd. | All Rights Reserved | Sitemap